Untitled Document

Seravat™are proprietary formulations using

React-NTI's patented micronized natural powders.

The resulting fine particle size distribution of 10-12

microns promotes excellent release characteristics

in powder metal casting applications.

Field testing of Seravat™ has show that this product reduces

emissions, lowers lubricant usage, leaves no residues, has no misting

properties, and improves secondary machining.

Testing Data

Attributes

Chemical & Physical Data

General Blending Procedure for Cotton/Polymer and Starch Polymer Mixes

Laboratory Mixes 1-25 lbs.		Large Mixes 100-40,000 lbs.
1	Weigh out components. (Iron, Lube, Graphite, Copper, etc.)	1	Weigh out components. (Iron, Lube, Graphite, Copper, etc.)
2	Put all components in jar, container, blender, etc.	2	Put one half of the required iron and all of the lube in the blender
3	Blend for 5 minutes	3	Blend for 10 minutes
4	Remove lid(s) and clean around edges	4	Look for evidence of agglomerations, if found, screen material US 60Mesh
5	Replace lid(s) and blend for an additional 20 minutes.	5	Place screened material and remainder of components in blender.
6	Discharge blender	6	Blend for an additional 20 minutes.
7	Look for evidence of agglomerations, if found, screen material US 60Mesh.	7	Discharge blender.
These are general guidelines based on experience in standard double cone blenders. Results may be affected by blending speed, blend size in relation to blender size, etc. Screening should be done under conditions that would optimize only the removal of agglomerations.

Health and Safety Data

Before using this product, please consult our Material Safety Data Sheet for information on safe handling.